Kia EV6 GT Rear LED Light Bar — Moisture Removal & Reinstall
by Makeit_official
A 9-step repair guide to safely remove, dry, and reinstall the rear LED light bar on a Kia EV6 GT after moisture or condensation has built up inside the housing. Suited for a DIYer with basic tools and some hands-on experience.
Hardware
Replacement plastic clips (tailgate panel)
A small handful — inspect old ones for damage
8
Electrical contact cleaner spray
1 small can
6
Finishing
Silicone sealant (clear, automotive-grade)
1 small tube — optional, to reseal housing if gap is found
7
Microfibre cloths
2–3
3
Step 1 of 6
Disconnect the light-bar power plug
DISCONNECT POWER PLUG
- ✓Open tailgate fully before starting
- ✓Unplug LED light bar connector
- ✓Leave connector unplugged throughout repair
Instructions
• Open the tailgate fully before starting anything. • Locate and disconnect the electrical plug supplying power to the LED light bar. • Keep the connector unplugged for the entire duration of the repair — do NOT reconnect while moisture is still present.
Swipe or use ← → keys
Want to follow this guide step by step or log your own build?
Open in the Makeit App